National Hire Line: 0844 770 6774

Home  |  About Us  |  Gallery  |  Contact Us
mini crane hire
callus
request call back brochureicon
request call back
This email address is being protected from spambots. You need JavaScript enabled to view it.
accountnationwide

Maeda MC285 CRM(E)

 

The MC285 boxes way above its weight with a massive 2.82 ton lifting capacity while measuring just 750mm wide when stowed. Its slim body is able to fit through most doorways allowing access to areas previously inaccessible to standard cranes.

The MC285 has proven to be one of the most popular models of mini crane and is used in many varied applications.

 

Features at a glance...

• 2.82 Ton Max Capacity • 8.7m Max Working Height
• Slim Body Width (750mm) • Low Ground Pressure
• Manoeuvrability & Stability • Programmable Moment Limiter
• Hydrostatic Transmission • Tilt Sensor / Alarm
• Rubber Tracks • Hydraulic Disc Brake
• Remote Control

Specifications

Specifications

Capacity Maximum 2.82t x 1.4m
Working Radius Maximum 8.205m x 150kg
Lifting Height Maximum 8.7m x 550kg
Dimensions MC285 CRM
MC285 CRME
2715mm x 750mm x 1440mm
3285mm x 750mm x 1440mm
Weight MC285 CRM
MC285 CRME
1770kg
1950kg
Hook Speed Maximum 8m / min. (4 falls, 3rd layer)
Single Line Speed Maximum 32m / min. (3rd layer)
Hoist Rope Type IWRC 6 x Fi (29) Ø 7mm x 48m
Telescopic System Boom length
Telescoping speed
6.04m / 22 sec.
2.535m - 8,575m
 Boom Hoist System Boom Type
Hoist angle / speed
Fully automatic 5 section pentagonal telescopic boom
0° - 80° / 14 sec.
 Slew System Slew angle / speed 360° continuous / 1.0 rpm
 Outrigger System Type
Maximum extended Dimensions
4 Multi position box type. Hydraulic cylinders with lock valves.
(Length) 4580mm x (Front) 4530mmx (Rear) 3810mm
Traction System Drive
Travel speed
Gradability
Ground length x width
Ground pressure
Hydrostatic type, stepless forward and reverse
0 - 2.2km/h
20°
975mm x 200mm (Track dimensions)
0.45 kgf / cm2 (0.50 kgf / cm2 CRME)
Engine Model
Type
Rated output
Starting method
Fuel Tank capacity
Yanmar 2TNE68-MB
2 Cylinder water cooled diesel
6.57kw / 2600 rpm
Electric
Diesel / 12L
Electric Motor (optional) Type
Size
Fully enclosed fan cooled motor
5.5Kw 4P 380V
Standard Equipment Working light, hour-meter, 4-fall hook block, black rubber tracks, moment limiter, hydraulic safety valves, level, wire rope latch, machine body inclination alarm.
Optional Equipment EMO switch, working status lamp, overwind protection and cable remote control. White rubber tracks, single fall hook, two fall hook, searcher hook and radio remote control.

 

Outrigger Positions

Total rated load outriggers at maximum position

2.53m/4.075m boom 5.575m boom 7.075m boom 8.575m boom
Work Radius (m)  Total rated load (kg)  Work Radius (m) Total rated load (kg)   Work Radius (m) Total rated load (kg)   Work Radius (m) Total rated load (kg) 
 <1.4 2820 <3.0  1220 <3.6 820 <4.0 550
1.5 2520 3.5 970 4.0 740 4.5 400
2.0 1920  4.0 780  4.5 580 5.0 340
2.5 1570 4.5 630 5.0 480 5.5 300
3.0 1220 5.0 530 5.5 430 6.0 270
3.5 970 5.205 530  6.0 380 6.5 230
3.705 920 6.5 350  7.0 200
6.705 330  7.5 180
8.0 150 
8.205 150

Total rated load outriggers at any other position

2.53m/4.075m boom 2.97m boom 4.21m boom 5.45m boom
Work Radius (m) Total rated load (kg) Work Radius (m) Total rated load (kg) Work Radius (m) Total rated load (kg) Work Radius (m) Total rated load (kg)
<1.5 1720 <3.0 510 <3.6 400 <4.0 330
2.0 1070 3.5 410 4.0 330 4.5 280
2.5 630 4.0 330 4.5 280 5.0 230
3.0 520 4.5 280 5.0 230 5.5 180
3.5 430 5.0 230 5.5 180 6.0 160
3.705 350  5.205 200 6.0 160 6.5 150
6.5 150 7.0 100
6.705 140  7.5 80
8.0 70
8.205 60

Maximum Reach Below Ground Level

Four Fall Two Fall Single Fall
 10.10m 20.20m 40.40m

Dimensions

Diagrams

 

dimensions1

dimensions2

Working Range Diagram

Working Range Diagram

workingrange